Dragging a blade of steel against your face is never going to be a fun experience!
Fortunately, good shaving prep and the right technique can go a long way to ensuring you have a comfortable, pain-free shave.
So be kind to your skin and follow these basic steps to give your face the shave you deserve.
Irritation, redness and the painful sting from a cut (that just will not stop bleeding!) are not the best ways to start your day!
And as if the pain wasn’t enough, the stress to your skin of shaving can also lead to signs of premature aging.
But there’s a lot you can do to avoid this and ensure a smooth, pain-free shave before you even pick up your razor.
Preparing your skin well beforehand will halt painful ingrown hairs, razor bumps and sore skin infections. It will make your skin smoother and your beard softer and easier to cut. And as a bonus, it gives you a great complexion too!
When you start your shave adopting the correct shaving technique and using the razor in a way that won’t irritate your skin, means you can avoid surface redness and razor burn.
The following grooming tips are easy to put into practice and will make sure that your post-shave complexion is smooth, calm and even-toned.
#1: Prep your skin
A comfortable shave starts with good prep.
The first thing to do is splash your face with warm (not hot!) water. This will open up your pores and soften your facial hair, making for a smoother, more comfortable shave with less irritation. It also allows your hair follicles to relax, letting hair protrude out from the skin, and so making your beard easier to cut.
A great time to shave is when you’re taking a shower – or just afterwards. Your skin will stay warm and relaxed throughout the shaving process.It’s the reason that a barber will apply a hot towel to your face before a professional shave.
You can use the same principal yourself at home. Just use a warm wrung out washcloth to gently heat your skin.
The main thing to remember is that we are trying to keep your skin warm, moist and relaxed.
#2: Clean and gently exfoliate before you shave
The secret to getting a smooth, painless shave is to have smooth skin to start with. So the next step is to get your skin really clean and free from gunk.
Facial oil and dead skin cells create friction which stops the razor from getting close to your skin and gliding smoothly over it. Cleaning away the oil and exfoliating away the dead skin cells means less friction for your blade, and the closer and less painful your shave will be.
You need a good quality, non-drying face wash that includes a chemical exfoliator.
Then it will gently exfoliate at the same time as cleaning away excess oil and debris.
Of course, we hope that you choose our Daily Face Wash, but either way look for one that contains moisturizing Glycerin, and other soothing ingredients like Aloe Vera and Allantoin. A face wash like this will clear away oil and grime, but it won’t dry out your skin like a bar of soap will.
Obviously, you never want to dry out your skin, but this is even more crucial when you’re about to shave. Shaving over rough, dry skin is guaranteed to lead to soreness, irritation and razor rash!
An AHA is a natural chemical exfoliant and will dissolve away dead skin cells that can clog, blunt and reduce the life of your razor blades. But it does this without damaging or inflaming your skin like a gritty, physical scrub would do. Again, shaving over already inflamed skin is the last thing you need!
Exfoliation will also prevent ingrown hairs that can turn into angry red bumps and become infected when you shave over them.
What causes ingrown hairs?
Ingrown hairs occur when a hair that should grow out of the skin from the hair follicle, instead curls back or grows sideways into the skin. It’s the build-up of dead skin cells that traps the hair and stops it growing correctly, so clearing them away is important.
For more on how to calm and treat any ingrown hairs that you have, and, more importantly, prevent any new ones from appearing, see our piece here: "Suffering from ingrown hairs and razor bumps? Here's how to eliminate them for good".
The result of this prep will not only be a clean and smooth surface for you to start shaving, but it also brightens your complexion, letting your face’s natural glow shine through, even on non-shaving days.
We've got a quick tutorial on "How To Wash Your Face The Right Way" here.
#3: Use the right products
There are literally hundreds of shaving creams and gels to choose from, but you want to find a product that’s designed to effectively protect your skin during your shave, and for that you need a protective shave cream.
Why is shaving cream the best?
A nourishing shave cream will create a rich, lubricated barrier between your skin and the razor. This will protect your skin as well as providing lubrication for the shaving process itself, softening your beard and helping maintain your skin’s hydration level too.
This is particularly important if you already have sensitive skin.
Our Protective Shave Cream is based on moisturizing Glycerin and enriched with Shea Butter to nourish and protect your skin and Apricot Stone Oil to soften your beard for easier shaving. We’ve also added Aloe Vera to soothe your skin and purifying Tea Tree Oil to help reduce any redness and irritation.
If your skin is especially sensitive, or your beard is particularly tough, a good pre-shave oil can also help. It will soften the hairs making for an easier, smoother cut and as a result, less irritation.
And when it comes time for the shaving itself, we recommend using a good old-fashioned shaving brush with the shave cream. It may seem old school, but for a super-smooth finish, the shaving brush (much like the pre-shave oil) actually helps lift the hairs up and away from your skin for an easier, closer shave.
#4: Don’t lather
A big, frothy ‘beard’ of lather can feel reassuring. It’s as though your face is protected by a super soft cushion of foam …. but don’t be fooled! This frothy ‘cushion’ is made up of tiny pockets of air which will disappear as soon as a blade touches them, leaving your skin unprotected.
In addition, the propellants used to get the product out of the can, and the chemicals used to create the lather, are very drying and irritating for your skin.
Instead, always use a non-lathering protective shave cream on your skin to get a smooth close shave while protecting your skin from irritation.
How do I apply shave cream?
Apply a small amount of the cream to your face with your fingers, or with the shave brush using a circular motion. The shave brush will lift the hairs and coat them more evenly with the shaving cream.
Let the cream sit for two to three minutes, particularly if you have thicker facial hair. This helps the shaving cream really penetrate the hairs and soften them prior to cutting.
If you’re used to a foaming shave cream or shaving soap all of this will feel very strange at first but trust us, it’s the best way to protect your skin and prevent irritation.
Once you experience the results, you won’t go back!
#5: Map the direction of hair growth
Just take a minute to map out the direction of hair growth, or grain, on your face.
Grain can be very, very complicated! There are multiple grains on your face, especially on your neck and jaw line where the hairs tend to grow in all different directions.
These can easily be mapped out by lightly running your fingers down your beard. If it feels smooth with little resistance against your fingers, then you’re going with the grain, if there’s resistance and it feels prickly then you’re going against the grain.
Once you’ve mapped out the grains on your face you can (finally) pick up the razor!
#6: Up your razor game
Shaving is a skill, and one that is worth perfecting!
Start by getting expert advice from your barber as to the best way to shave your particular face and skin type. A lot can depend on the thickness and growth pattern of your beard, and he will be able to instruct you as to the best way to shave for you.
The thing to remember is that it’s important to always shave WITH the grain.
Why shave with the grain?
It’s tempting, we know, to shave against the direction of hair growth for that seemingly closer shave, but it’s not worth the irritation. It will only aggravate your skin and can distort the hair follicles causing ingrown hairs to form.
What is the best way to shave?
A key tip is to apply minimal pressure. Hold your razor at the very end of the handle, gripping it lightly. Then let the razor do the work. The only pressure applied should come from the weight of the razor.
And use short, confident shaving strokes, whilst avoiding going over the same spot multiple times.
Repeatedly shaving across the same area of your face will result in severe irritation.
It’s the hardest shaving skill to master but cutting every hair without having to repeat a spot is how you avoid cuts, scrapes, and razor rash.
And making quick short strokes on your beard allows for the change in grain direction that happens all over your face.
Whatever type of razor you prefer, remember to change the blades often.
The dull, damaged edge of an over-used razor blade will pull against your skin, causing painful redness and razor burn.
Swapping out your blades every 3-4 shaves will ensure an effortless, pain-free cut.
#7: Moisturize post-shave
It can take up to 48 hours for your freshly-shaven face to fully heal, and keeping your skin well hydrated during that time is the best defence against irritation.
While most moisturizers will immediately hydrate your skin, you can up the ante by seeking out those containing ingredients that will soothe, relieve and repair your post-shave skin at the same time. There are many healing ingredients to choose from but Aloe Vera, Allantoin and D-Panthenol are all excellent examples.
In fact, to nourish and repair your skin after shaving, our Hydrating Daily Moisturiser is tough to beat! It’s been specifically developed to lock in moisture and clinically proven to dramatically increase skin hydration levels for over 8 hours after application.
It contains Hyaluronic Acid (the gold standard of moisturizing agents) to provide long-term hydration and keep your skin smooth and supple, at the same time as reducing fine lines and wrinkles, restoring elasticity and improving skin texture. Leaving you with a smooth, even-toned complexion.
And to soothe and heal your face it uses Aloe Vera and Allantoin, alongside Vitamin E and D-Panthenol to restore the natural barrier function of your skin and give immediate comfort and calm any irritation.
Plus it’s super-light, absorbs instantly (and painlessly) and won’t leave a greasy film on your face.
#8: Avoid traditional aftershaves
You may have been put off using anything on your baby-sensitive, post-shave skin because in the past it has led to a nasty stinging sensation.
The cause of this post-shave irritation is actually the drying alcohol which is included in traditional aftershaves (and many mainstream moisturisers too).
And because the alcohol evaporates on contact with the skin, it’s also extremely drying. Avoid it at all costs!
#9: Take it easy
Be good to your skin and let it rest. Try to limit shaving to every other day so that your face has a chance to recover.
Follow this advice each time that you shave and the effect will be immediate.
No more cuts, irritation and ingrown hairs... just a smooth, close, pain-free shave and a calm, even-toned complexion.
- Prep your skin
- Clean and gently exfoliate before you shave
- Use the right products
- Don't lather
- Map the direction of hair growth
- Up your razor game
- Moisturize post-shave
- Avoid traditional after-shaves
- Take it easy
Try a little tenderness.